Praises And Criticism Of The Yeppoon Wave Pool - Stab Mag

Watch: Stab High China Presented By Monster Energy, Finals Day

5494 Views

Praises And Criticism Of The Yeppoon Wave Pool

A first hand documentation of surfing’s newest play pool. 

news // Oct 29, 2018
Words by stab
Reading Time: 6 minutes

Editor’s note: if you want to catch up with the rest of our Yeppoon wavepool series, click here. 

It became clear that there was a little tension between Surf Lakes’ engineers and the rest of its crew.

Surf Lakes took the interesting approach of bringing friends, family, and the odd surf publication to their site before they had actually tested it.

Reason being, the people who’d been involved in this project for the past few years didn’t want to miss the Big Reveal.

This makes sense on an individual, emotional level—but engineering is all about math, logistics.

Specifically at this pool, which has a significant number of moving parts, the engineers didn’t feel comfortable pushing it hard right off the bat. Their hesitation would later prove wise, as the machinery tended to break when they ramped it up too quickly (at the request of the pool executives). 

So when everybody showed up on Monday expecting to see and surf waves, but the engineers weren’t able to achieve that due to a lack of significant background testing, you’ll understand how this wavepool demo was destined to struggle.

And the engineers would have always been aware of that fact; hence the internal tension.

P1099080
“When ya reckon they’ll send another one?”

Making matters more difficult was the fact that this pool was built on a (relatively) tight budget.

There are two factors at play there:

  1. Surf Lakes is privately funded by individual investors, meaning they have a limited cash supply.

  2. The Yeppoon pool was always meant to be a prototype — not a commercial site — meaning they built the full-scale system in order to prove its efficacy, not to endure.

One of the places they had to cut, for instance, was on the concrete.

According to a source within the Surf Lakes camp, a “complete” concrete job would have cost them $3 million AUD. Rather than copping that sizable sum, Surf Lakes allegedly opted for the $1 million option, which led to concrete so thin that it broke beneath the surfers’ feet when they entered and exited the pool. At one point on Friday, the slab ripped a hole in the floor and dirt started surfacing from below. In order to fix the problem, Surf Lakes stretched a layer of lining over the hole and weighed it down with sandbags.

This is clearly not a long-term solution, but a worthy change considering this pool is merely a proof of concept prototype. 

Another thing they saved on was with the air-vent welding, which as you’ll recall from yesterday’s story, couldn’t withstand the air pressure it had been designed to mitigate.

There’s one last (and major) thing that Surf Lakes may have cut financial corners on, but we’ll get to that a little later.

For now, let’s get back to those engineers.

Having delivered the first semi-legitimate session of the week on Thursday arvo, the engineers figured they’d fulfilled their obligation to the surfers and could now focus on improving the pool’s functionality.

Au contraire.

These guys may know a lot about mechanical engineering and hydrodynamics, but it would appear their knowledge of surf psychology is minimal.

Once the pool was proven to be functional, several surfers decided to extend their trips rather than skipping town after a few fun rides. This caused another bout of tension between the two opposing parties, which came to a head over Thursday night’s dinner at The Strand.

“So it looks like we’ll be testing different functions all morning,” one of the engineers told our crew. “We’re gonna try to get that triple-pump working. But I reckon you guys could come around midday to get some more waves.”

Having already blown off Ryan Callinan’s qualification bash to stay the extra day, and with an eight-hour drive separating him from his Gold Coast home, Mitch Crews didn’t love the sound of waiting around all morning.

“But the thing is… what you guys need most right now is content of people surfing the waves, right? And since we already have a system that we know works, plus the fact that us surfers are already here, doesn’t it make sense to push out some waves in the morning, rather than just fiddling with the machine again?”

This would have been a devastating point were it not for the engineer’s clever retort:

“Frankly mate, what we need most right now is a pool that works as closely as possible to what was advertised, which is to say: overhead waves in consistent sets.”

This was especially true due to the “investor day” set to happen on the coming Sunday. Without their support, it might be difficult for Surf Lakes to proceed with their grand ideas, and without a fully functional pool, it might be difficult to get their support.

IMG 0938

Just a wee bit small… and singular.

Both Mitch’s and the engineers’ points were valid, but seeing as how they’d already collected some surfing footage over the last few days, whereas the pool’s functionality had hit only 20% of its promised threshold, it seemed the engineer had the upper hand.

As we had recently discovered, the pool couldn’t produce “sets” until they dialed in the highly specific timing of plunger pumps, which used the flow of water to minimize stress on the machinery. This, the engineers said, would take significant time to perfect.

We showed up at 12 the next day and heard the same thing we’d been hearing all week: “They’re just working on a few technical bits, but we should be surfing within the hour.”

As that hour came and went, we asked Surf Lakes’ media correspondent, Wayne Dart, if it was worth sticking around or if we should bounce back to Yeppoon and return once the machine was functional.

Darty recommended the latter, so we headed for lunch at Lure Cafe — our favorite health joint in Yeppoon.

It was there that we received a troublesome messsge from a proximal pool source

“Machine’s fully broken — the whole thing snapped. :(”

The “whole thing snapped”? What does that even mean?

P1099171
See that pole in the center? It’s supposed to be straight…

What it meant was this: the center beam, which for continuity’s sake will be called the plunger’s “handle”, was severely creased at its base. By the looks of our photos, the beam compressed under some significant force and nearly bent in half.

When we first saw the damage, our instinct was to blame it on Surf Lakes’ frugality. Why else would they use a rusty, hollow beam where a solid steel pole would have been the superior option?

Then we considered the notion that perhaps this hollow beam allowed for the pressurized air to flow through it, thus helping to lift the thousand-ton behemoth.

As Surf Lakes is somewhat protective of their technology, we’ll likely never know. But what we do know is this: the structure is fixable. It will just take some time.

“It’s only a part,” Darty told us when we returned to collect our gear. “Parts can be replaced. What’s important is that we’ve shown our design works. We’ll be back soon enough.”

Rough estimates call for two months of reconstruction, which includes the complete draining of the pool.

Comments

Comments are a Stab Premium feature. Gotta join to talk shop.

Already a member? Sign In

Want to join? Sign Up

Advertisement

Most Recent

Watch: Finals Day at Stab High China Presented By Monster Energy

Time to declare some winners, and give away a surfboard to the best comment.

Nov 13, 2026

Watch: Our First Day Of Chinese Airspace Exploration, In 14 Minutes And 20 Something Images

A recap of sorts.

Nov 13, 2026

Watch The Full Replay: Stab High China Presented By Monster Energy, Day One

That was immense.

Nov 12, 2026

Watch: A Full Day Of Stab High China X Monster Energy Warm-Ups

Or, proof that the ramp is as big as we've been claiming.

Nov 12, 2026

The Other Kelly Slater Documentary

Our latest How Surfers Get Paid episode collided with a multimillion-dollar Hollywood production, and we…

Nov 12, 2026

Albee Layer’s Biggest Career Regrets, Getting Sober, And The Heaviest Wave On Earth | StabMic Ep. 38

+ why he wants to see more double grabs at Stab High.

Nov 10, 2026

Everything You Need To Know About Stab High China, Presented By Monster Energy

We're two days away from our biggest chlorinated ramp yet.

Nov 10, 2026

Can We (Scientifically) Predict Barelling Waves?

Kanoa Pick and Cliff Kapono are giving it a damn good shot.

Nov 9, 2026

Why Does China Send People To The Moon?

We asked the designers of the world's best air section.

Nov 6, 2026

Meet Axel Dominguez Before He Does Something Stupid At Stab High

The 19-year-old French surfer just dropped an SEOTY entry called 'Glint.'

Nov 6, 2026

World Title Race: Who Needs What At Pipeline?

Don't let the yellow jerseys fool you.

Nov 5, 2026

I Know You’ve Got A Good Kelly Story, Too…

Coming soon: Our first feature length 'How Surfers Get Paid' documentary.

Nov 4, 2026

Ocean & Earth Release First Full-Length Surf Film In 27 Years | ‘DUALITY’ Starring Dakoda and Harley Walters

A gene pool counting the latest Surf100 winner + a 2x Stab High finalist.

Nov 3, 2026

Medina Wins First CT In Three Years, Claims Cloud 9 For The Goofs

While a bruised and bloodied Simmers rock and rolls into World Title contention.

Nov 3, 2026

Exclusive: Stab & Quiksilver’s New 11-Piece Collection

With 2x Stab High winner Hughie Vaughan at the centre of the mood board.

Nov 3, 2026

A Truly Obscene Day Of Competitive Surfing At Cloud 9

Day 3 leaves behind a wake of broken boards, battered bodies, and sickeningly good highlights.

Nov 2, 2026

Is The Surf Industry Having A Crisis Of Imagination? | StabMic Ep. 37 | Pat Towersey

"Marketing is total bullshit."

Nov 2, 2026

Watch: Oxbow’s Laura Coviella in ‘Untamed’ 

Feat round waves in the Ments.

Nov 1, 2026
Advertisement